General-machine-products Various Double "E-Loc Coupling" Manuel d'utilisateur télécharger pdf

INSTALLATION INSTRUCTIONS DOUBLE E - LOC ® COUPLINGS

Loosen Locknuts until 1” of thread is visible on each side of the body. Mark each conduit 3 1/4” from the

end (for 1” to 1 1/4 “ sizes), 3 3/8” from the end (for 1 1/2” sizes) or 3 7/8 “ for the end (for 2” sizes)

Push conduit into each end making sure each conduit is tight against

the center stop and inserted to the marked line

Mark Conduit Mark Conduit for insertion depth

Hand tighten each locknut

General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053 USA

Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com

SOLD BY

INSTALLATION INSTRUCTIONS DOUBLE E - LOC ® COUPLINGS Loosen Locknuts until 1” of thread is visible on each side of the body. Mark each conduit 3 1/4”

Pas de commentaire

General-machine-products Various Double "E-Loc Coupling" Manuel d'utilisateur